PannerNode

A PannerNode always has exactly one input and one output: the input can be mono or stereo but the output is always stereo (2 channels); you can't have panning effects without at least two audio channels!

Constructor

PannerNode.PannerNode

Creates a new PannerNode instance.

Properties

Inherits properties from its parent, AudioNode.

PannerNode.coneInnerAngle

Is a double value describing the angle, in degrees, of a cone inside of which there will be no volume reduction.

PannerNode.coneOuterAngle

A double value describing the angle, in degrees, of a cone outside of which the volume will be reduced by a constant value, defined by the coneOuterGain attribute.

PannerNode.coneOuterGain

A double value describing the amount of volume reduction outside the cone defined by the coneOuterAngle attribute. Its default value is 0, meaning that no sound can be heard.

PannerNode.distanceModel

An enumerated value determining which algorithm to use to reduce the volume of the audio source as it moves away from the listener.

PannerNode.maxDistance

A double value representing the maximum distance between the audio source and the listener, after which the volume is not reduced any further.

PannerNode.orientationX

Represents the horizontal position of the audio source's vector in a right-hand cartesian coordinate sytem. While this AudioParam cannot be directly changed, its value can be altered using its value property. The default is value is 1.

PannerNode.orientationY

Represents the vertical position of the audio source's vector in a right-hand cartesian coordinate sytem. The default is 0. While this AudioParam cannot be directly changed, its value can be altered using its value property. The default is value is 0.

PannerNode.orientationZ

Represents the longitudinal (back and forth) position of the audio source's vector in a right-hand cartesian coordinate sytem. The default is 0. While this AudioParam cannot be directly changed, its value can be altered using its value property. The default is value is 0.

PannerNode.panningModel

An enumerated value determining which spatialisation algorithm to use to position the audio in 3D space.

PannerNode.positionX

Represents the horizontal position of the audio in a right-hand cartesian coordinate sytem. The default is 0. While this AudioParam cannot be directly changed, its value can be altered using its value property. The default is value is 0.

PannerNode.positionY

Represents the vertical position of the audio in a right-hand cartesian coordinate sytem. The default is 0. While this AudioParam cannot be directly changed, its value can be altered using its value property. The default is value is 0.

PannerNode.positionZ

Represents the longitudinal (back and forth) position of the audio in a right-hand cartesian coordinate sytem. The default is 0. While this AudioParam cannot be directly changed, its value can be altered using its value property. The default is value is 0.

PannerNode.refDistance

A double value representing the reference distance for reducing volume as the audio source moves further from the listener.

PannerNode.rolloffFactor

A double value describing how quickly the volume is reduced as the source moves away from the listener. This value is used by all distance models.

Methods

Inherits methods from its parent, AudioNode.

PannerNode.setPosition()

Defines the position of the audio source relative to the listener (represented by an AudioListener object stored in the AudioContext.listener attribute.)

PannerNode.setOrientation()

Defines the direction the audio source is playing in.

PannerNode.setVelocity()

Defines the velocity vector of the audio source — how fast it is moving and in what direction. In a previous version of the specification, the PannerNode had a velocity that could pitch up or down AudioBufferSourceNodes connected downstream. This feature was not clearly specified and had a number of issues, so it was removed from the specification.

Examples

In the following example, you can see an example of how the createPanner() method, AudioListener  and PannerNode would be used to control audio spatialisation. Generally you will define the position in 3D space that your audio listener and panner (source) occupy initially, and then update the position of one or both of these as the application is used. You might be moving a character around inside a game world for example, and wanting delivery of audio to change realistically as your character moves closer to or further away from a music player such as a stereo. In the example you can see this being controlled by the functions moveRight(), moveLeft(), etc., which set new values for the panner position via the PositionPanner() function.

To see a complete implementation, check out our panner-node example (view the source code) — this demo transports you to the 2.5D "Room of metal", where you can play a track on a boom box and then walk around the boom box to see how the sound changes!

Note how we have used some feature detection to either give the browser the newer property values (like AudioListener.forwardX) for setting position, etc. if it supports those, or older methods (like AudioListener.setOrientation()) if it still supports those but not the new properties.

// set up listener and panner position information
var WIDTH = window.innerWidth;
var HEIGHT = window.innerHeight;
var xPos = Math.floor(WIDTH/2);
var yPos = Math.floor(HEIGHT/2);
var zPos = 295;
// define other variables
var AudioContext = window.AudioContext || window.webkitAudioContext;
var audioCtx = new AudioContext();
var panner = audioCtx.createPanner();
panner.panningModel = 'HRTF';
panner.distanceModel = 'inverse';
panner.refDistance = 1;
panner.maxDistance = 10000;
panner.rolloffFactor = 1;
panner.coneInnerAngle = 360;
panner.coneOuterAngle = 0;
panner.coneOuterGain = 0;
if(panner.orientationX) {
  panner.orientationX.value = 1;
  panner.orientationY.value = 0;
  panner.orientationZ.value = 0;
} else {
  panner.setOrientation(1,0,0);
}
var listener = audioCtx.listener;
if(listener.forwardX) {
  listener.forwardX.value = 0;
  listener.forwardY.value = 0;
  listener.forwardZ.value = -1;
  listener.upX.value = 0;
  listener.upY.value = 1;
  listener.upZ.value = 0;
} else {
  listener.setOrientation(0,0,-1,0,1,0);
}
var source;
var play = document.querySelector('.play');
var stop = document.querySelector('.stop');
var boomBox = document.querySelector('.boom-box');
var listenerData = document.querySelector('.listener-data');
var pannerData = document.querySelector('.panner-data');
leftBound = (-xPos) + 50;
rightBound = xPos - 50;
xIterator = WIDTH/150;
// listener will always be in the same place for this demo
if(listener.positionX) {
  listener.positionX.value = xPos;
  listener.positionY.value = yPos;
  listener.positionZ.value = 300;
} else {
  listener.setPosition(xPos,yPos,300);
}
listenerData.innerHTML = 'Listener data: X ' + xPos + ' Y ' + yPos + ' Z ' + 300;
// panner will move as the boombox graphic moves around on the screen
function positionPanner() {
  if(panner.positionX) {
    panner.positionX.value = xPos;
    panner.positionY.value = yPos;
    panner.positionZ.value = zPos;
  } else {
    panner.setPosition(xPos,yPos,zPos);
  }
  pannerData.innerHTML = 'Panner data: X ' + xPos + ' Y ' + yPos + ' Z ' + zPos;
}

Specifications

Browser compatibility

See also

• Using the Web Audio API